Tilbake


FEATURES


- Fully Automatic Antenna Tuner NFG-230 specially designes for JST-135 -


1. Microcomputer-Controlled Full Automatic Tuning
The full automatic tuning has been realized by a 1-chip 8-bit microcomputer, which controls an LC tuning circuit with the aid of various sensors. The perfect tuning is obtained only by the switch operation on the front panel of JST-135.


2. Wide Tuning Range
Since the NFG-230 tunes to the various types of antennas such as dipole, whip or lang-wire antenna in the wide frequency range of 1.8 MHz to 30 MHz, the multi-band operation is possible with a single antenna. The SWR after tuning is 1,5 or less.


3. Memory Function
Since the tuner memorizes the tuning data for the operating frequency, the perfect tuning is obtained when the same frequency is selected. The data is backed up by a lithium battery for five years or more. .


4. Use of Custom Hybrid IC
The use of a custom hybrid IC in the sensors, the heart of automatic tuner, has realized the compact and high reliable tuner.


5. Functions for enhanced availability.
A. Tuner "Through" Function
The tuner can be made as "through" to prevent the sensitivity reduction when the receiving frequency is out of the ham bands.

B. Tuning Interrupt Function
Even if the tuning has startet, the operation can be interrupted by the switch operation of the tranceiver. At this time, the originaltuning data is retained. This function is provided to protect the tuning data from unwanted change due to inadvertent operation.


6. Compact and Waterproof Construction
The tuner has been designed to be compact waterproof to withstand severe environmental conditions, especially considering the close installation to an antenna.


2. SPECIFICATIONS


Frequency range

1,8 to 30 MHz

Maximum input power

200 w PEP

Tuning range

Resistance value 5 ohm to 1 kohm
Capacitance value more than 150 pF

Input SWR after tuning

Less than 1 : 1,5 or less (Depends on the antenna used.)

Tuning power

More than 5 W, less than 30 W

Tuning time

2 to 4 seconds typical Max. less than 10 sec)

Input voltage

13,8 /24 V DC +- 15 %, negative ground
(No input voltage selection is required.)

Dimensions

230 (230)W x 90 (100)H x 380 (430)D mm

Weight

Approx. 3,.5 kg


The circuit and specifications are subject to change without notice.